Allied Telesis AT-9900 Series Release Note page 53

show perm
Syntax
SHOW PERM[=perm-name]
where perm-name is the name of a permanent assignment
Description
This command displays the name, local and remote ports and remote IP address for all permanent assignments currently defined on the router. If a permanent
assignment is specified by name, only that permanent assignment is displayed
Figure 8: Example output from the show perm command
Port
Name Local
-----------------------------------------------
laser-print 12
-----------------------------------------------
Table 2: Parameters in output of the show perm command
Parameter Meaning
Name Name of the permanent assignment.
Local Local port for the permanent assignment.
Remote Remote port for the permanent assignment.
IP address IP address of the remote router.
Examples
To display all the permanent assignments configured on the local router, use the command:
show perm
Version 276-03
C613-10474-00 REV B
Remote IP address
04 172.16.8.37
Permanent Assignments (CR00011355)
(Figure 8, Table 2).
53