Allied Telesis AT-9900 Series Release Note page 51
At-8900 and at-9900 series software maintenance release note 276-03
Hide thumbs
Also See for AT-9900 Series:
- Release note (232 pages) ,
- How to configure (110 pages) ,
- Hardware reference manual (47 pages)
Advertisement
Permanent Assignments (CR00011355)
51
reset perm
Syntax
RESET PERM=perm-name
where perm-name is the name of the permanent assignment. The name is case sensitive and must be identical on each router in the permanent assignment. If the
name contains spaces, it must be in double quotes.
Description
This command resets a named permanent assignment. The port being used by the permanent assignment is reset and the TCP connection being used for the
permanent assignment is reset. A new TCP connection is established for the permanent assignment.
Examples
To reset the permanent assignment called DataLogger, use the command:
reset perm=datalogger
Related Commands
add perm
delete perm
set perm
show perm
Version 276-03
C613-10474-00 REV B
Advertisement
