Allied Telesis AT-9900 Series Release Note page 34

Level 3
CR Module Level
CR00006439
GUI
CR00011055
Classifier
CR00011123
IP Multicast
CR00011482
Firewall
CR00011550
IP multicast
CR00011609
DHCP
snooping
Version 276-03
C613-10474-00 REV B
3 When a user logged onto the router or switch through the GUI, the router or
switch's log recorded several HTTP 404 (Not Found) errors. This was because the
browser expected to see some images that the GUI resource file did not contain.
This issue has been resolved. The expected images are now present.
3 If a user attempts to change the range of TCP or UDP ports used by a classifier,
the hardware filter table may not be updated if there is a lack of hardware filter
table space. Previously, this resulted in a mismatch between the hardware and
software filter tables.
This issue has been resolved, such that if the port range change is not possible,
both the software and hardware filter tables revert back to the original filter
definitions.
3 Previously, the switch dropped a multicast packet if the packet had IP options bits
set and the switch had recently forwarded multicast data to the group address in
the packet.
This issue has been resolved.
3 The parameters maxupnpportmap and icmpunreachabletimeout were
missing from the command set firewall policy.
This issue has been resolved.
3 Performance of the switch's internal manipulations of IP multicast routes has
been improved, and the stability of PIM-DM under extremely high loads has
correspondingly been improved.
3 A new lease could be added to the DHCP snooping database as a full entry even
after the maximum number of leases for the port had been exceeded.
This issue has been resolved.
Description
Features in 276-01
Y Y Y Y Y Y Y Y
- - - - - - - Y
- - - Y Y - - Y
Y Y Y Y Y - - -
- - - - - - - Y
- - - Y Y Y Y Y
34
Y Y
Y -
Y Y
- Y
Y -
Y -