Allied Telesis AT-9900 Series Release Note page 42

Figure 1: New parameters in the output of the show asyn=0 command
ASYN 0 : 0000001470 seconds
ASYN information
Name ...................... Asyn 0
Status .................... enabled
Mode ...................... Ten
Data rate ................. 9600
Parity .................... none
Data bits ................. 8
Stop bits ................. 1
Test mode ................. no
In flow state (mode) ...... on
Out flow state (mode) ..... off (Hardware)
Autobaud mode ............. disabled
Max tx queue length ....... 16
TX queue length ........... 3
Transmit frame ............ none
RX queue length ........... 0
IP address ................ none
Max transmission unit ..... 1500
Ten timer value ........... 100
.
.
.
Version 276-03
C613-10474-00 REV B
Last change at: 0000001465 seconds
(Hardware)
Making Asynchronous Ports Respond More Quickly (CR00011565) 42