Allied Telesis AT-9900 Series Release Note page 19

CR Module
CR00011931 VLAN
CR00011943 IP Gateway
CR00011969 OSPF
CR00012014 Switch
CR00012036 Firewall
Version 276-03
C613-10474-00 REV B
Level
3 After users added multiple ports to one private VLAN as tagged ports, those ports
could not be added to another private VLAN as tagged ports by using a single
command (they could be added one port at a time).
This issue has been resolved.
3 Previously, it was possible to modify settings for the default local IP interface
when it had no IP address. However, these settings were invalid so the router or
switch did not save them.
This issue has been resolved. Settings for the default local IP interface now cannot
be changed unless the interface has an IP address assigned to it.
3 When a user changed the asexternal setting for OSPF, sometimes OSPF did not
correctly update the LSA database.
This issue has been resolved.
3 Setting a port's speed to a fixed speed (such as 100mfull) should also disable
automdi on the port. Previously, if the switch set the port speed to a fixed speed
during start-up before the switch had fully initialised, auto MDI was not disabled.
This issue has been resolved.
3 Previously, the command set firewall policy=policy-name
othertimeout=minutes did not change the timeout period for firewall GRE
sessions.
This issue has been resolved.
Note that when a firewall session establishes, its timeout is initially set to
5 minutes. Once the session processes two or more packets, its timeout changes
to the value specified by this command.
Description
Features in 276-02
- - - Y Y Y Y Y
Y Y Y Y Y Y Y Y
Y Y Y Y Y Y Y Y
- - - - - - - Y
Y Y Y Y Y - - -
19
Y -
Y Y
Y Y
Y -
- Y