Allied Telesis AT-9900 Series Release Note page 32

CR Module Level
CR00011243
ISAKMP
CR00011269
SSL
CR00011300
User
CR00011324
SSL
CR00011328
PIM
CR00011337
Environment
Monitoring
CR00011345
MIB
Version 276-03
C613-10474-00 REV B
2 Previously, if an IPsec/ISAKMP tunnel was under heavy load, an ISAKMP peer may
have retransmitted messages. When the last message in an ISAKMP exchange
was retransmitted, the remote peer did not expect to receive the second message
after the exchange had finished and caused the router or switch to reboot.
This issue has been resolved.
2 When the SSL server had multiple concurrent users, some SSL sessions failed to
establish, because the SSL handshakes failed.
This issue has been resolved.
2 Previously, if the router or switch was acting as an 802.1x authenticator, and it
received an illegal RADIUS packet (an Access-Reject packet with an EAP code of
"successful"), the router or switch would reboot.
This issue has been resolved. The switch now rejects such authentication
requests.
2 A reboot could occur when the SSLv2 client received a hello message that had an
incorrect challenge length.
This issue has been resolved, so that the SSL server's resistance to denial of service
attacks has been improved.
2 When the switch was using PIM to route multicast traffic, it sometimes rebooted
if the command show switch table=nh was entered.
This issue has been resolved.
2 The switch did not record the system temperature, and therefore output of the
command show system displayed the temperature as 0°C.
This issue has been resolved.
2 The ATR enterprise MIB includes objects for managing ping operations. These
objects within the MIB are now fully supported.
Minor modifications have also been made to the MIB. Download the latest
atrrouter.mib file from ftp.alliedtelesyn.co.nz/pub/ar-mib/atrouter.zip.
Description
Features in 276-01
Y Y Y Y Y - - -
Y Y Y Y Y Y Y Y
Y Y Y Y Y Y Y Y
Y Y Y Y Y Y Y Y
- - - - - - - Y
- - - - - - - -
Y Y Y Y Y Y Y Y
32
- -
Y Y
Y Y
Y Y
Y -
- Y
Y Y