Allied Telesis AT-9900 Series Release Note page 24

CR Module
CR00011995 BGP
CR00012043 BGP
Version 276-03
C613-10474-00 REV B
Level
4 To simplify displaying BGP memory usage, the command show bgp memlimit
bgp has been removed. Use the command show bgp memlimit scan instead.
Also, you can now display only the BGP backoff log messages by using either of
the following commands:
show log type=55 subtype=backoff
show log type=55 subtype=7
4 When a user entered conflicting values for BGP backoff thresholds (the backoff
and low parameters of the set bgp backoff command), the error message did
not adequately show the dependency between these two parameters.
This issue has been resolved. The error message now reads (for example):
Error (3103332): BACKOFF parameter value 90 too low; must be greater than
LOW parameter value 94.
Description
Features in 276-02
Y Y Y Y Y - - Y
Y Y Y Y Y - - Y
24
Y Y
Y Y