Wireless Lan Card - Toshiba PORTEGE M400 Maintenance Manual

4.10 Wireless LAN card

4.10 Wireless LAN card

Removing the Wireless LAN card
To remove the Wireless LAN card, follow the steps below. (See Figure 4-17.)
CAUTION: Do not try to remove the wireless LAN card with the computer turned on.
1. Peel off the insulator.
2. Remove the following screw and metal plate.
3. Disconnect the wireless LAN antenna cables (black and white) from the wireless
4. Remove the following screw and disconnect the wireless LAN card from the
PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com
The computer or the wireless LAN card can be damaged. Do not touch the
connectors on the wireless LAN card on the computer. Debris on the
connectors may cause the wireless LAN card access problems.
• M2.0×4.0B BIND screw or M2.0×4.0B TORX screw ×1
LAN card using an antenna coaxial cable disconnector.
connector on the system board.
• M2.0×4.0B
BIND screw
Spacer
(on the back of the
insulator)
Wireless LAN card
M2.0×4.0B BIND
Wireless LAN antenna
cable (black)
Figure 4-17 Removing the Wireless LAN card
4 Replacement Procedures
×1
Insulator
M2.0×4.0B BIND or M2.0×4.0B TORX
Metal plate
Wireless LAN antenna
cable (white)
[CONFIDENTIAL] 4-29