Firmware Enhancements - HP StorageWorks 2/32 - SAN Switch Release Note

Firmware Enhancements

5. Click on the small icon of a folder with a key inside of it.
6. A new window appears and you are prompted for the user name and password
7. Enter the appropriate user name and password and the administrative menu
8. Click on the Upload/Download tab to bring up Firmware menu.
9. Select the button Firmware Download in the Function category.
10. Under Host Details, make sure the Protocol setting is set to FTP.
11. In the User Name field, enter the user name for the OpenVMS machine you
12. In the Host IP field, enter the IP address of the OpenVMS machine you are
13. In the Password field, enter the password for the username specified in step
14. In the Filename field, enter the following: V4_0_2b/release.plist
15. Click on the button labeled Apply and the window will begin to display its
Firmware Enhancements
The following sections list enhancements included with Fabric OS Version 4.0.2b
firmware.
Note:
2/32 and HP StorageWorks Core Switch 2/64 products. This firmware will not work if
loaded onto the HP StorageWorks SAN Switch 1 Gbps models, or HP StorageWorks
SAN Switch 2/8 or 2/16 products.
16
for the switch.
will appear.
are using.
using.
11.
status.
Fabric OS Version 4.0.2b firmware works with HP StorageWorks SAN Switch
SAN switch 2/32 Version 4.0.2b Release Notes