HP StorageWorks 2/32 - SAN Switch Release Note page 36

Fabric OS Commands
Example
To display the error log without page breaks:
See Also
errShow, errSaveLvlSet, errSaveLvlShow, errNvLogSizeSet,
errNvLogSizeShow, errShow Command
New operands have been added to this command.
Short Description: Display the error log.
Syntax
Availability
Description
Use this command to display the error log, prompting the user to type return
between each log entry. It is identical to errDump, except that errDump
displays all entries without page breaks. The output of errshow command
36
switch:switch:admin> errDump
Error 03
0x2a5 (fabos): Jun 14 12:03:51
Switch: 0, Debug HAMKERNEL-IP_UP, 5, (session=3) Heartbeat from
Standby CP
Error 02
0x2a5 (fabos): Jun 14 12:03:50
Switch: 0, Info HAM-REDUNDANT_INFO, 4,
(Heartbeat Up) System in REDUNDANT state
Error 01
0x28b (fabos): Jun 14 12:01:27
Switch: 0, Error EM-CP_ERR, 2, CP in slot 5 set to faulty due to
CP ERROR
switch:switch:admin>
errShow [-s swinst] [-a] [-p]
admin
SAN switch 2/32 Version 4.0.2b Release Notes