Features Summary - HP StorageWorks 2/32 - SAN Switch Release Note

Features Summary

The FW232.TXT configuration file is used with the SAN Switch 2/32. This file
includes switch and Fabric Watch default parameters. All parameters (except the
Fabric Watch default parameters) can be downloaded to a switch when logged on
as the "admin" user.
Note:
parameters within this file. It will not change any other parameter on the switch which
may have been changed at the customer site. Remember that all switches in a fabric
must have the same configuration settings.
Features Summary
The following section summarizes the management features available with SAN
Switch 2/32 products.
SAN Switch 2/32
The SAN Switch 2/32 ships with the following features enabled, and ready to use:
SAN Switch 2/32 Power Pak
The SAN Switch 2/32 Power Pak ships with the following features enabled, and
ready to use:
6
Performing a configdownload with these files only appends or changes those
Full Fabric—Provides Full Fabric OS.
Web Tools—Provides a graphical user interface (GUI) to monitor and manage
the entire fabric.
Zoning—Allows partitioning of the SAN into logical groupings of devices
that access each other.
Full Fabric—Provides Full Fabric OS.
Web Tools—Provides a graphical user interface (GUI) to monitor and manage
the entire fabric.
Zoning—Allows partitioning of the SAN into logical groupings of devices
that access each other.
Fabric Watch—Monitors the performance and status of HP StorageWorks
SAN Switches, and alerts network managers as problems arise.
SAN switch 2/32 Version 4.0.2b Release Notes