Obtaining Firmware Enhancements - HP ProCurve 10Base-T 12 Installation Manual

Troubleshooting

Obtaining Firmware Enhancements

In the future, Hewlett-Packard may provide improvements to the HP ProCurve
10Base-T Hub 12M and the HP ProCurve 10Base-T Hub 24M through firmware
upgrades. The upgrade code can be downloaded from a PC attached to the hub's
RS-232 port or over the network. The update procedures are described in
documents that come with the firmware enhancements. Also, some down-
loading instructions are covered in chapter 6 of the HP ProCurve 10Base-T
Hubs Management and Configuration guide.
You can determine the current firmware version on the hub from the ASCII
console. Look for the SNMP Agent EEPROM version number to determine the
revision. When you access the console, the version number appears. It is also
on the General System Information Screen under the Status and Counters
Menu and the Identity Window in the Browser Interface.
To obtain the latest agent firmware, use the download instructions on the
quick reference card included at the beginning of this manual.
Contact your HP-authorized LAN dealer or local HP sales office for the latest
on firmware enhancements.
2-8