HP StorageWorks 2/32 - SAN Switch Release Note page 42

Fabric OS Commands
command is to be executed. Valid values for switch instance are 0 (for the switch
instance associated with slots 1 though 4) or 1 (for the switch instance associated
with slots 6 though 10).
Example
Following example shows how to display current error log save level.
See Also
errSaveLvlSet, errNvLogSizeSet, errNvLogSizeShow, errShow
errNvLogSizeSet Command
Short Description: Resize the persistent error log. This command is new for Fabric
OS V4.0.2b or higher
Syntax
Availability
Description
Use this command to resize the persistent error log of a switch to a new size
specified by the operand number_of_entries. The persistent error log is
resized immediately after the successful execution of this command.
When this command is executed from the Standby CP, the switch instance number
operand is required. The switch instance number is supplied by specifying the
<-s swinst> operand. This operand is not required when logged into the
Active CP.
Operands
This command has the following operands:
s swinst - This is an optional parameter. It specifies a switch instance number.
42
switch:admin> errSaveLvlShow
The following example shows how to display current error log
save level on the Standby CP for switch 0.
switch:admin> errSaveLvlShow -s 0
errNvLogSizeSet [-s swinst] number_of_entries
admin
SAN switch 2/32 Version 4.0.2b Release Notes