Hardware Updates - HP StorageWorks 2/32 - SAN Switch Release Note

Table 1: SAN Switch 2/32 Orderable Hardware
30m LC-to-LC multi-mode fc cable
50m LC-to-LC multi-mode fc cable
2m LC-to-SC fc cable
2m LC-to-SC multi-mode fc cable
16m LC-to-SC fc cable
5m LC-to-SC multi-mode fc cable
15m LC-to-SC multi-mode fc cable
30m LC-to-SC multi-mode fc cable
50m LC-to-SC multi-mode fc cable
SC female to SC female adapter
2m LC male to SC male adapter kit
Universal Rack Mount Kit

Hardware Updates

The following section lists hardware updates for the SAN Switch 2/32.
Important Information Regarding Rack Mounting Hardware
The hp StorageWorks SAN Switch Universal Rack Mount Kit is included with
your switch. See the hp StorageWorks SAN Switch Universal Rack Mount Kit
Installation Addendum, part number AV-RU6YA-TE, supplied with the rack
mount kit for installation instructions.
Note:
supplied with your switch. Using longer than recommended screws to install your switch
into a rack will result in physical damage to the switch motherboard.
SAN switch 2/32 Version 4.0.2b Release Notes
Accessory
* premerger HP part number
** premerger Compaq part number
HP highly recommends installing the switch in racks with only the hardware
Part Number
221692-B26**
221692-B27**
C7529A*
221691-B21**
C7530A*
221691-B21**
221691-B23**
221691-B26**
221691-B27**
C7534A*
C7534A*
331148-B21
Hardware Updates
9