HP StorageWorks 2/32 - SAN Switch Release Note page 33

Example:
Persistent Error Log Enhancement
The Error Log sub-system is enhanced to save a maximum of 1,536 messages in
RAM, that is, a total of 256 messages for each error message level (Panic, Critical,
Error, Warning, Info, and Debug). In addition, important messages are stored in a
separate persistent error log to guarantee that they are not lost in case of power
outage or system reboot.
The enhancement prevents messages of lesser severity from over-writing
messages of greater severity. For example, Warning messages cannot over write
Error, Critical or Panic messages.
Features of the Persistent Error Log
Persistent error log features follow:
SAN switch 2/32 Version 4.0.2b Release Notes
switch12k:admin> firmwarecommit
Doing firmwarecommit now.
Please wait ...
........................................
........................................
........................................
........................................
........................................
........................................
......................
Replicating kernel image.
................................
FirmwareCommit completes successfully.
switch12k:admin>
Preserved across power cycles and system reboots.
Default capacity to store 1,024 error log entries.
May be resized at run time without having to reboot the switch or the system.
May be resized at run time to configure a maximum of 2,048 entries.
Basically, persistent error log can be resized any where between 1,024 and
2,048 entries.
Fabric OS Commands
33