Clearing The Switch Error Log; Sample Error Log Message; Sample Error Log Message; Error Log With - HP StorageWorks 16-EL - SAN Switch Reference Manual

switch:admin> errshow
Error 497
--------
0x4a5 (fabos): Oct 03 04:40:14
Switch: 0, Info TRACK-LOGIN, 4, Successful login
.
.
.
Type <CR> to continue, Q<CR> to stop: q
Figure 2: Error log with page breaks

Clearing the Switch Error Log

To clear the error log for a particular switch:
1. Log in to the switch as the admin user.
2. Enter the errclear command to clear the System Error Log.

Sample Error Log Message

Figure 3
Error 1001
--------
0x253 (fabos): Nov 03 14:11:53
Switch: 1, Error EM-CP_ERR, 2, CP in slot 5 set to faulty because
of CP ERROR
Figure 3: Sample error log message
The fields in this error message are explained in
Diagnostic and System Error Messages Version 3.1.x Reference Guide
shows a typical message from the error log.
Introduction to System Error Messages
Table 4.
21