HP StorageWorks 16-EL - SAN Switch Reference Manual page 82

System Error Messages
82
<rtwrRequest: No memory>, 0, 0, 0, 0, 0
Explanation: RTWR has run out of memory inside the rtwrInit function.
<detail 1>, if non-zero, contains the pointer of the payload received.
<detail 2>, if non-zero, contains the switch ID of the destination domain.
<detail 3>, if non-zero, contains the size of memory you should allocate.
<detail 4>, if non-zero, contains the thread ID.
<detail 5>, if non-zero, contains the process ID.
Recommended Action: Check the memory usage on the switch.
<rtwrAsyncMultiRequest>, 0, 0, 0, 0, 0
Explanation: Internal error.
Recommended Action: Call Technical Support.
<rtwrAsyncMultiRequest: pidlist_copy failed>, 0, 0, 0, 0, 0
Explanation: Out of memory.
Recommended Action: Check the memory usage on the switch or call
Technical Support.
<rtwrSyncRequest>, 0, 0, 0, 0, 0
Explanation: Internal error.
Recommended Action: Call Technical Support.
<rtwrSyncRequest: Unreachable domain>, 0xff, domain, 0x9abc, domain,
0xff
Explanation: Domain is not reachable.
Recommended Action: Use fabricshow to see if the domain is offline.
Check the physical ISLs for the domain.
<rtwrSyncRequest: Cannot create sync. semaphore>, 0, 0, 0, 0, 0
Explanation: Out of memory.
Recommended Action: Check the memory usage on the switch or call
Technical Support.
<rtwrSyncRequest: Cannot write message queue>, 0, 0, 0, 0, 0
Explanation: Out of memory.
Recommended Action: Check the memory usage on the switch or call
Technical Support.
<rtwrSyncRequest: semaTake failed>, 0, 0, 0, 0, 0
Explanation: Internal error.
Recommended Action: Call Technical Support.
<rtwrMsgProcess: msg NULL>, 0, 0, 0, 0, 0
Explanation: An empty message has been received. Internal error.
Recommended Action: Call Technical Support.
Diagnostic and System Error Messages Version 3.1.x Reference Guide