Bloom-Raminit_To; Bloom-Stuck_Wait - HP StorageWorks 16-EL - SAN Switch Reference Manual

Recommended Action
Disable one or more other ports in the same quad to enable the specified slot and
port
Severity
Warning

BLOOM-RAMINIT_TO

Message
<switch number> Critical BLOOM-RAMINIT_TO, 1, <port number> <port index>
failed to init RAM @ <offset>, busy status = <busy index>
Explanation
RAM initialization cannot be completed within the expected time for the specified
port number.
Recommended Action
Copy the error message information, run portlogdisable and
supportshow (in order) to capture debug information and then contact
Technical Support. Technical Support may also ask for additional debug
information from POST and systemtest.
Severity
Critical

BLOOM-STUCK_WAIT

Message
<switch number> Panic BLOOM-EXCESSIVE_BUSY_MINI, 0, <port number> <Loop
status> <TX-from-RX status> busy <busy buffer value> <message string>
Explanation
One of the following situations occurred when the port was busy transitioning to
the next state on the specified slot and port:
Diagnostic and System Error Messages Version 3.1.x Reference Guide
Bloom_System Error Messages
29