Seclib-Secviol_Login_Remote - HP StorageWorks 16-EL - SAN Switch Reference Manual

System Error Messages

SECLIB-SECVIOL_LOGIN_REMOTE

Message
<switch number> Info SECLIB-SECVIOL_LOGIN_REMOTE, 4, Security violation:
Login failure attempt via TELNET/SSH/RSH. IP Addr: <IP address>
Explanation
A security violation was reported. The specified unauthorized remote device
attempted to log in through a Telnet or SSH connection; the login failed.
Recommended Action
Check the Telnet policy and verify that all hosts allowed access to the fabric
through Telnet or SSH are included in the Telnet policy. If the host is allowed
access to the fabric but is not included in the Telnet policy, add it to the policy.
If the host is not allowed access to the fabric, this is a valid violation message and
an unauthorized entity is trying to access the fabric. Appropriate action should be
taken as specified by your enterprise security policy.
Note:
Severity
Informational
94
Telnet Policy controls access for both Telnet and SSH connections.
Diagnostic and System Error Messages Version 3.1.x Reference Guide