Zone_System Error Messages; Zone-Duplicate_Entry - HP StorageWorks 16-EL - SAN Switch Reference Manual

System Error Messages

ZONE_System Error Messages

A zone in a fabric is a set of devices that have access to one another. All devices
connected to a fabric may be configured into one or more zones. Every zone has at
least one member. Empty zones are not allowed. Zoning allows partitioning of a
SAN into logical groupings of devices that access each other. Zones can be
configured dynamically and can vary in size, depending on the number of
fabric-connected devices. Devices can also belong to more than one zone.
Because zone members can access only other members of the same zone, a device
not included in a zone is not available to members of that zone. When zoning is
enabled, all devices must be zoned to communicate with the fabric.
These error messages indicate any problems associated with zoning.

ZONE-DUPLICATE_ENTRY

Message
<switch number> Warning ZONE-DUPLICATE_ENTRY, 3, WARNING - Duplicate
entries in zone <zone name> specification.
Probable Cause
Duplicate entries exist in the zone object. A zone object member is specified more
than once in any single given zone object.
Recommended Action
Check the members of the zone and delete the duplicate member.
Severity
Warning
114 Diagnostic and System Error Messages Version 3.1.x Reference Guide