Errlog-Set_Msg_Save_Lvl - HP StorageWorks 16-EL - SAN Switch Reference Manual

Recommended Action
No action required.
Severity
Informational

ERRLOG-SET_MSG_SAVE_LVL

Message
<switch number> Info ERRLOG-SET_MSG_SAVE_LVL, 4, Error Log message save
level is set to <error level>
Explanation
An informational message that states the severity levels of the error messages that
are set to be saved in the Persistent (nonvolatile) Error Log. For example, if the
level is set to 3, then 0-, 1-, 2-, and 3-level error messages will be saved.
The maximum number of persistent messages is 256. HP recommends that you
always set the Persistent Error Log to record at least Panic errors (level 0) and
Critical errors (level 1). If the log fills up, more critical messages take precedence
over less critical messages in the log.
The severity levels of error messages are:
Recommended Action
No action required.
Severity
Informational
Diagnostic and System Error Messages Version 3.1.x Reference Guide
0 = Panic
1 = Critical
2 = Error
3 = Warning
4 = Informational
5 = Debug
ERRLOG_System Error Messages
33