Sec_System Error Messages; Sec-Rsendfail - HP StorageWorks 16-EL - SAN Switch Reference Manual

SEC_System Error Messages

This section describes security errors, warnings, and information that occur during
secure-related data management or fabric merge in secure mode. Administrators
should pay more attention to secure fabric to distinguish between internal switch
or fabric operation error or external attack. In case of external attack, the
administrator should react properly to stop the attack and protect the fabric.

SEC-RSENDFAIL

Message
<switch number> Error SEC-RSENDFAIL, 2, RCS process fails: %s
Explanation
The Reliable Commit Service (RCS) process failed to complete. RCS is a reliable
mechanism to transfer data from one switch to the other switches within the
fabric. This mechanism guarantees that either all switches update to the new
database or none of them update to the new database. This process can fail if one
switch in the fabric is either busy or in an error state that cannot accept the
database.
Recommended Action
RCS is used when the security database is changed by a command issued by
security (for example, secpolicysave, secpolicyactivate,
secversionreset, and the like). If the switch is busy, the command may fail
the first time only. Retry after first fail. If the command fails consistently, contact
Technical Support.
Severity
Error
Diagnostic and System Error Messages Version 3.1.x Reference Guide
SEC_System Error Messages
85