HP StorageWorks 16-EL - SAN Switch Reference Manual page 30

System Error Messages
Recommended Action
Copy the error message information, run portlogdisable and
supportshow (in order) to capture debug information and then contact
Technical Support. Technical Support may also ask for additional debug
information from POST and systemtest.
Severity
Panic
30
<waiting for OPEN state>
Explanation: The specified port could not transition to the OPEN state.
<waiting for CLOSE state>
Explanation: The specified port could not transition to the CLOSE state.
<init stuck at bloomLPC waiting for OPEN state>
Explanation: The specified port could not transition to the OPEN state when
executing the Loop Port Control (LPC) command.
Diagnostic and System Error Messages Version 3.1.x Reference Guide