Brocade Communications Systems SN3000B Command Reference Manual page 66

22
agAutoMapBalance
--disable
--force
--show
--help
EXAMPLES
To display the automatic login redistribution settings for port groups 0 and 1:
To display the automatic login redistribution settings for N_Ports and F_Ports.
40
-nport
Enables automatic login redistribution in the event that one or more N_Ports come
online. When automatic login redistribution is enabled, the F_Ports mapped to the
current N_Ports are rebalanced among the N_Ports.
Disables automatic login redistribution upon removal or addition of a specified port
type.
-fport
Disables automatic login redistribution in the event that one or more F_Ports go
offline. When automatic login redistribution is disabled, the remaining F_Ports
maintain their existing N_Port mappings.
-nport
Disables automatic login redistribution in the event that one or more N_Ports
come online. When auto map balancing is enabled, the F_Ports mapped to the
current N_Ports are rebalanced among the N_Ports.
-pg Port_Group_Number | -all
Specifies the port group number or all port groups. These operands are
mutually exclusive and optional with the --enable and --disable options.
When a port group is specified, command execution is targeted to the
members of that specific port group. When all port groups are specified,
command execution is targeted to all port groups defined in the Access
Gateway. The port group options are allowed only when login balancing is
enabled on the specified port groups.
Enforces automatic login redistribution on a one-time basis in the event that
automatic login redistribution is disabled for N_Port addition, F_Port removal or
both. This command forces rebalancing of the F_Port to N_Port mapping once. It
does not affect the configuration settings.
Displays the auto login distribution configuration.
Displays the command usage.
switch:admin> agautomapbalance --show
AG Policy: pg
--------------------------------------------
PG_ID LB mode
--------------------------------------------
0 Enabled
1 Disabled
---------------------------------------------
switch:admin> agautomapbalance --show
-------------------------------------------------
AG Policy:
-------------------------------------------------
automapbalance on N_Port Online Event:
automapbalance on F_Port Offline Event:
--------------------------------------------------
nport fport
Enabled Disabled
- -
Auto
Disabled
Enabled
Fabric OS Command Reference
53-1001764-01