PLC-XK2200 /2600 /XK3010
7. Error Code Table
Error Code
?
101
102
103
201
301
302
402
Note) These error codes are applied to Expand Command, not to Basic Command
Expand Serial Command Functional Specifications
-When the received data cannot be decoded
-Parameter determination error (digit number error,
including invalid value, etc.)
The function is not available in the selected Mode
Selected value is out of range (Not reflected)
Command mismatched to Hardware (command for
Optional function which is not installed)
When reached upper or lower limit of increasing or
decreasing data
Command cannot be executed during capturing
display. Resend the command after a while
Command cannot be executed during Auto PC
operation. Resend the command after a while
Command cannot be executed during PIN code
operation. Resend the command after a while.
16 / 73
Contents