Error Code Table - Sanyo PLC-WL2500A Manual

PLC-WL2500A / WL2501A/ WL2503A Expand Serial Command Functional Specifications

7. Error Code Table

Error Code
-When the received data cannot be decoded
? -Parameter determination error (digit number error, including invalid
value, etc.)
When the function selected is not available under current condition.
101
ex) When receiving signal-related commands while no signal is entered
102 Selected value is out of range (Not reflected)
Command mismatched to Hardware (command for Optional function
103
which is not installed)
201 When reached upper or lower limit of increasing or decreasing data
301 Command cannot be executed during capturing display.
302 Command cannot be executed during Auto setup operation.
402 Command cannot be executed during PIN code operation.
Note) These error codes are applied to Expand Command, not to Basic Command
Details
15/72