Determining Required Memory; Preparations For Installing Business Continuity Manager From A Tape - HP StorageWorks P9000 Software Installation Manual

For staging datasets:
Estimate the disk capacity based on the amount of Business Continuity Manager log data.
For log stream datasets:
Estimate the disk capacity based on the save period, and the amount of Business Continuity
Manager log data after offload.
For external datasets (OUTLOG):
Estimate the disk capacity based on the save period, and the amount of log data after offload.
For details about the format for external datasets (OUTLOG), see the HP StorageWorks P9000
for Business Continuity Manager Software User Guide.

Determining Required Memory

The memory capacity required to run Business Continuity Manager follows:
For a user region of 16 MB or less: 1,024 KB
For an extended user region of 16 MB or more:
◦ For TSO/E: 4,000 KB + (4
◦ For batches: 4,000 KB + (3
The memory capacity required when linking with P9000 Replication Manager Software follows.
The PREFIX parameter and DEVN parameter in the formula are the initialization parameters of
the Business Continuity Manager agent.
For a user region of 16 MB or less: 2,048 KB
For an extended user region of 16 MB or more:
6,000 KB + A KB
+ (512
+ (64
A: The larger of (1.5
◦
D: Among the numbers of devices specified for the DEVN parameters, the highest number
◦
of devices.
◦ P: Among the copy groups used by the Business Continuity Manager agent, the highest
number of copy pairs in any group.
Where
◦
The memory capacity required to use Business Continuity Manager Monitor follows:
For a user region of 16 MB or less: 2,048 KB
For an extended user region of 16 MB or more:
6,000 KB + (3 x number-of-copy-pairs) KB
+ (C + S) x 1 KB
C: Number of copy group parameters specified in the YKMONCG file
◦
◦ S: Number of action parameters specified in the YKMONCG file

Preparations for Installing Business Continuity Manager from a Tape

The sample library provides a sample JCL that the user can use to install.
To install from the Business Continuity Manager product the install tape, first this sample JCL should
be copied from the install tape. The sample JCL can be copied from the install tape by the following
20 Installing Business Continuity Manager
number-of-specified-PREFIX-parameters)
number-of-specified-DEVN-parameters)
D) and (3
A B indicates rounding up the decimal numbers from the result of A B.
number-of-copy-pairs) KB
number-of-copy-pairs) KB
1,024
1,024
P)
KB
KB