HP StorageWorks P9000 Software Installation Manual page 52

To configure the environment settings without using the Remote DKC Control Function:
1. Set up the storage system. For details, see the HP StorageWorks P9000 for Business Continuity
Manager Software User Guide.
2. Create configuration file datasets. Create datasets for the following configuration files:
Disk configuration definition file
Copy group definition file
For details, see
3. Install BCM. For details, see
4. Configure the environment settings for the BCM agent. For details, see the following sections:
"Setting the TCP/IP Port Number" (page 58)
"Setting Up the Security for Business Continuity Manager Agents" (page 58)
"Setting Up IBM HTTP Server" (page 60)
"Creating Initialization Parameters" (page 65)
"Creating a Cataloged Procedure for Startup for the Business Continuity Manager Agents"
(page 77)
5. Start IBM HTTP Server.
6. Start the BCM agent. For details, see the chapter about linking the BCM agent to P9000
Replication Manager in the HP StorageWorks P9000 for Business Continuity Manager Software
User Guide.
7. Configure the P9000 Replication Manager initialization settings. For details, see the HP
StorageWorks P9000 Replication Manager Software Installation and Configuration Guide.
Configuring the Environment Settings Using the Remote DKC Control Function (New BCM
Installation)
Figure 5 (page 53)
from before installation of Business Continuity Manager, using the Remote DKC Control Function.
52 Setting Up the Environment When Linking with P9000 Replication Manager
"Creating Configuration File Datasets" (page
"Installing Business Continuity Manager" (page
shows the general procedure for configuring the environment settings starting
50).
14).