Parameters - HP StorageWorks P9000 Software Installation Manual

[ MODE(startup-mode)]
1
[ LOCK(lock-mode)]
1

Parameters

PORT(port-number) ~ <numeric characters ((1-65535)) <<24042>>
Specifies the Business Continuity Manager agent port number to be used for TCP/IP
communication with P9000 Replication Manager. You cannot specify a port number
that is being used by another job. Specify a port number that is not being used in
the system.
RECVWAITTIME(reception-wait-time) ~ <numeric characters> ((0-65535)) <<180>>
When TCP/IP communication with P9000 Replication Manager is performed, this
specifies the wait time (in seconds) from when a receive request is initiated to when
data is received. A value of 0 means that Business Continuity Manager agent is to
wait for data indefinitely.
HOSTNAME (host-identification-name) ~ <1 to 50 alphanumeric characters <<value specified for
the &SYSNAME system symbol>>
Specify this parameter when P9000 Replication Manager needs to identify the
Business Continuity Manager agent. When Business Continuity Manager agent is
running on more than one host, and a HOSTNAME (host identification name) value
is duplicated in these hosts, P9000 Replication Manager cannot identify the host
on which the target Business Continuity Manager agent is running. To ensure that
P9000 Replication Manager can identify the host on which the Business Continuity
Manager agent is running, specify a unique HOSTNAME value for each host.
When this parameter is omitted, the value of the &SYSNAME system symbol is
assumed. For details about the &SYSNAME system symbol, see the MVS Initialization
and Tuning Reference.
When Business Continuity Manager agent runs on more than one host and an
&SYSNAME system symbol value is duplicated in these hosts, P9000 Replication
Manager cannot distinguish between the hosts. When the &SYSNAME value is make
sure that HOSTNAME values are unique among the hosts.
(PREFIX,prefix,local-site's-DAD-ID[,route-list-ID[,]local-site's-Non-Gen'ed-DAD-ID],[remote-site's-DAD-ID]]])
To enable P9000 Replication Manager to manipulate the Business Continuity
Manager agent, the prefix of the configuration files managed by Business Continuity
Manager must be specified.
Specifies the prefix when information about Business Continuity Manager is to be
acquired from P9000 Replication Manager. This must be the value specified in
Business Continuity Manager's Set Defaults panel. When monitoring PPRC copy
pairs, specify the prefix of the configuration file created in the Scan Copy Pair
Inside Storage System panel. For details about the Set Defaults panel or Scan Copy
Pair Inside Storage System panel in Business Continuity Manager, see the HP
StorageWorks P9000 for Business Continuity Manager Software Reference Guide.
You can specify multiple PREFIX parameters. Specify multiple PREFIX parameters
when the storage information to be acquired is information registered in multiple
configuration files that have different prefixes, in an environment where P9000
Replication Manager and the Business Continuity Manager agent are one-to-one.
prefix ~ <PREFIX string consisting of 1 to 16 characters>
Specifies the file name prefix of the Business Continuity Manager configuration files
that are used by P9000 Replication Manager. This must be the value specified in
Configuration File Prefix in Business Continuity Manager's Set Defaults panel. P9000
68 Setting Up the Environment When Linking with P9000 Replication Manager