Yksetenv Command Syntax - HP StorageWorks P9000 Software Installation Manual

START YKALCSVC[,PARM='{SVC-number | DELETE}']
Function
Registers or deletes a user SVC.
Parameters
SVC-number < numeric characters> ~ ((200 to 255))
Specifies an SVC number to assign to a user SVC.
DELETE
Specified to delete a user SVC.
If you omit the optional PARM= part of the command, an unused SVC number between 200 and
255 is assigned.
Return Codes
Table 14 YKALCSVC Command Return Codes List
Return Code
0
4
16
20
NOTE: A user SVC routine registered with the YKALCSVC command of Business Continuity
Manager 5.1 or later cannot be deleted by using a YKALCSVC command of Business Continuity
Manager earlier than version 5.1. So, be careful when you perform an upgrade in an environment
where multiple versions are used.

YKSETENV Command Syntax

Format
START YKSETENV,
PARM='{YKCMDIF=[host-id] |
YKLCNSE=[prefix1] |
YKLCNS2=[prefix2] |
LOGPUT=[LOGR|SAM] |
SYSLOG=[YES|NO]}[,...]
Function
Sets the following Business Continuity Manager environment variables:
Host ID.
Prefix for the license information dataset.
Business Continuity Manager Log output method.
Settings so that CLI command-execution logs can be output to SYSLOG.
Parameters
YKCMDIF=[host-id] ~ <2-digit hexadecimals> ((00 to 1F))
For the host ID, specify a value that is unique among hosts (operating systems). The
specified value for the host ID is given priority over the &YKCMDIF system symbol
in the IEASYMxx parmlib member. If this command is executed with the host ID
omitted (PARM='YKCMDIF=' is specified), the value of the &YKCMDIF system
symbol will be used.
28 Installing Business Continuity Manager
Meaning
The command ended normally.
The SVC number is already registered.
Registration or deletion of the SVC number failed.
Processing stopped due to an error (the specified value or execution environment is
invalid).