Overview Of Hp Storageworks P9000 For Business Continuity Manager Software; Licenses Provided For Business Continuity Manager - HP StorageWorks P9000 Software Installation Manual

1 Overview of HP StorageWorks P9000 for Business
Continuity Manager Software
This chapter explains the provided licenses, prerequisite conditions, and supported storage systems.
For more detailed information about Business Continuity Manager, see the HP StorageWorks
P9000 for Business Continuity Manager Software User Guide. In this document, Business Continuity
Manager is also called BC Z Manager.
"Licenses Provided for Business Continuity Manager" (page 7)
"Program Prerequisites" (page 10)
Unless otherwise specified, the term storage system in this guide refers to the following disk arrays:
HP StorageWorks XP24000 Disk Array
HP StorageWorks XP20000 Disk Array
HP StorageWorks XP12000 Disk Array
HP StorageWorks XP10000 Disk Array
HP StorageWorks XP1024 Disk Array
HP StorageWorks XP128 Disk Array
HP StorageWorks P9500 Disk Array
The GUI illustrations in this guide were created using a Windows computer with the Internet Explorer
browser. Actual windows may differ depending on the operating system and browser used. GUI
contents also vary with licensed program products, storage system models, and firmware versions.
Business Continuity Manager can control the following replication products:
BC - Business Copy for Mainframe/Hitachi ShadowImage for Mainframe (SI)
CA or Cnt Ac-S Z - Continuous Access Synchronous for Mainframe/Hitachi TrueCopy for
Mainframe (TC)
CAJ or Cnt Ac-J Z - Continuous Access Journal for Mainframe/Hitachi Universal Replicator for
Mainframe (UR)
CAA - TrueCopy Asynchronous for Mainframe (TCA)
NOTE: Hitachi TrueCopy Asynchronous (TCA) is supported on the HP StorageWorks XP Disk
Array. TCA is not supported on the P9500 Disk Array. Business Continuity Manager can be used
with both P9500 and XP disk arrays. The XP disk array copy products can be configured and
controlled using the P9000 version of BCM. With the exception of TrueCopy Asynchronous, the
HP product names are used in this manual. For compatibility with existing implementations on XP
disk arrays, the Hitachi abbreviations shown in parenthesis are accepted by the user interface.
The graphics in this manual show the Hitachi abbreviations but your system may show the HP
abbreviations.

Licenses Provided for Business Continuity Manager

To use Business Continuity Manager, license keys for Business Continuity Manager must be installed.
There are two types of license keys for Business Continuity Manager: a key for using basic functions,
and a key for using the extended consistency group function (4x4 extended CTG). When the
Licenses Provided for Business Continuity Manager 7