Setting The Security; Setting Up The Resource Access Control Facility (Racf); Setting Security For The Environment Configuration Commands; Setting Security For Cli Commands - HP StorageWorks P9000 Software Installation Manual

YKT402I YKCMDIF = 01
YKT402I YKLCNSE = HP
YKT402I YKLCNS2 = BCM
YKT402I LOGPUT
YKT402I SYSLOG

Setting the Security

Setting Up the Resource Access Control Facility (RACF)

Setting security for the environment configuration commands

To use the YKALCSVC or YKSETENV command, you must restrict user access by using the RACF
program control function. Note that you do not need to restrict user access for the YKDSPENV
command. For details, see the Security Server RACF Security Administrator's Guide. If you use the
YKALCSVC or YKSETENV command without restricting user access, BC Z Manager will not operate
properly.

Setting security for CLI commands

To use CLI commands, you must set up the RACF FACILITY. Users can execute CLI commands once
profiles have been defined for the RACF FACILITY class, and once view permissions for these
profiles have been granted to the users' accounts.
Table 17 (page 31)
Table 17 Correspondence between profiles defined in the FACILITY Class and available CLI commands
Profile Defined for the FACILITY Class
STGADMIN.YKA.BCM.COMMANDS
(Operation profiles)
(&YKCMDIF = "00"
(&YKLCNSE = N/A
(&YKLCNS2 = N/A
= SAM (&YKLOGPT = "LOGR"
= NO (&YKSYSLG = "YES"
lists two types of profiles: operation profile and reference profile.
)
)
)
)
)
Available CLI Command
YKBLDCMD
YKBLDPTH
YKDELCMD
YKDELETE
YKDELPTH
YKEWAIT
YKFCSTAT
YKFREEZE
YKH2B
YKMAKE
YKQHPATH
YKQRYDEV
YKQRYPTH
YKQUERY
YKRECVER
YKRESYNC
YKRUN
YKSCAN
YKSTATS
YKSUSPND
Installing Business Continuity Manager 31