Setting Up The Security For Business Continuity Manager Monitor; Creating Configuration Files For Business Continuity Manager Monitor - HP StorageWorks P9000 Software Installation Manual

Setting Up the Security for Business Continuity Manager Monitor

This section explains how to set up the security for Business Continuity Manager Monitor.
Define the appropriate user ID and group ID in the RACF STARTED class of the cataloged procedure
for startup for Business Continuity Manager Monitor.
The following is an example of using the TSO/E command with the STARTED class:
—>SETROPTS GENERIC (STARTED)
->RDEFINE STARTED YKBCMMON.* STDATA(USER(user-ID) GROUP(group-ID)TRUSTED(YES))
->SETROPTS RACLIST(STARTED) REFRESH
Business Continuity Manage Monitor uses a Business Continuity Manager CLI command to monitor
copy groups. To use the CLI command, define one of the following profiles in the RACF FACILITY
class, and then grant the view permission for the defined profile to the previously defined user ID
or group ID.
If you specified one of the following in the Business Continuity Manager Monitor YKMONCG file,
grant the view permission to the STGADMIN.YKA.BCM.COMMANDS profile:
DELETE, MAKE, RESYNC, or SUSPEND for the ACTION parameter
ADJUST as the startup action for the CGSTARTUPSTATUS parameter
DUPLEX as the startup status for the CGSTARTUPSTATUS parameter of ShadowImage or
TrueCopy Asynchronous when NOCANCEL is not specified
In other cases, grant the view permission to the STGADMIN.YKA.BCM.YKQUERY profile.
The following is an example of using the TSO/E command with the FACILITY class:
->SETROPTS CLASSACT(FACILITY)
->RDEFINE FACILITY STGADMIN.YKA.BCM.COMMANDS UACC(NONE)
->PERMIT STGADMIN.YKA.BCM.COMMANDS CLASS(FACILITY) ID(user-ID) ACCESS(READ)

Creating Configuration Files for Business Continuity Manager Monitor

Before using Business Continuity Manager Monitor, you need to use Business Continuity Manager
to create the configuration files shown below. They should match the configurations of the copy
groups to be monitored from Business Continuity Manager Monitor.
Disk configuration definition file (mandatory)
Copy group definition file (mandatory)
Route list definition file
The route list definition file is required when using the Remote DKC Control Function and the
TrueCopy Consistency Preservation Function.
80 Setting Up an Environment for Business Continuity Manager Monitor