HP StorageWorks P9000 Software Installation Manual page 54

4. Configure the environment settings for the Remote DKC Control Function.
Configure the following settings:
Route list definitions
Command device registrations
For details, see the HP StorageWorks P9000 for Business Continuity Manager Software User
Guide.
5. Create configuration file datasets.
Create datasets for the following configuration files:
Disk configuration definition file
Copy group definition file
For more information, see
6. Configure the environment settings for the Business Continuity Manager agent. For details,
see the following sections:
"Setting the TCP/IP Port Number" (page 58)
"Setting Up the Security for Business Continuity Manager Agents" (page 58)
"Setting Up IBM HTTP Server" (page 60)
"Creating Initialization Parameters" (page 65)
"Creating a Cataloged Procedure for Startup for the Business Continuity Manager Agents"
(page 77)
7. Start the IBM HTTP Server.
8. Start the Business Continuity Manager agent. For details, see the chapter about linking the
Business Continuity Manager agent with Replication Manager in the HP StorageWorks P9000
for Business Continuity Manager Software User Guide.
9. Configure the Replication Manager initialization settings. For more information, see the HP
StorageWorks P9000 for Business Continuity Manager Software User Guide.
Configuring the Environment Settings in an Existing Environment (Upgrade BCM Installation)
Figure 6 (page 55)
existing environment with BCM installed (that is, with the storage system configured, and with the
environment set up for using the Remote DKC Control Function).
54 Setting Up the Environment When Linking with P9000 Replication Manager
"Creating Configuration File Datasets" (page
shows the general procedure for configuring the environment settings in an
57).