HP StorageWorks P9000 Software Installation Manual page 124

startup mode An execution permission mode that is specified in an initialization parameter of Business Continuity
Manager agents. The startup mode consists of the monitor mode and the edit mode.
STOP command An operator command used to stop a Business Continuity Manager agent or BCM Monitor
subordinate DKC A DKC that is a non-supervisor remote DKC subjected to arbitration processing in a 4x4
configuration
supervisor DKC A remote DKC that is in charge of arbitration processing in a 4x4 configuration
suspend status A collective name for the SUSPOP status, SUSPCU status and, SUSPER status
SVC supervisor call interruption
system logger A function that writes, displays, and deletes the MVS standard log
service
T
target port A Fibre Channel interface port on the RCU. This port is connected to the MCU by a Fibre Channel
interface (FIBRE) cable.
TC TrueCopy, a function that remotely creates and manages volume copies between storage
subsystems. This writes a copy pair to the S-VOL synchronously with the P-VOL.
TC copy pair with A copy pair defined from Business Continuity Manager as a TC copy pair in a 2DC configuration
the HyperSwap with HyperSwap and UR for a PPRC TC copy pair for which HyperSwaps are enabled. To define
attribute a TC copy pair with the HyperSwap attribute, execute the YKH2B command, or specify HS for
Linkage Option in the Copy Group Attributes panel. Business Continuity Manager can only monitor
and dissolve TC copy pairs with the HyperSwap attribute.
TCA TrueCopy Asynchronous.
TPC-R Tivoli Storage Productivity Center for Replication. An IBM copy-management product. TPC-R makes
it possible to create or operate PPRC copy pairs for which HyperSwaps are enabled.
TrueCopy TrueCopy for Mainframe
Asynchronous
TSO/E Time Sharing Option/Extensions
U
UR Hitachi Universal Replicator. Also known as HP XP Continuous Access Journal (Cnt Acc-J).
V
VM virtual machine
VOLSER Volume serial number.
W
WAKEUP An operator command used to wake up BCM Monitor. This command is specified in the MODIFY
command command.
X
XML Extensible Markup Language
XRC XP for Compatible Extended Remote Copy software
Y
YKAGENT An executable program of the Business Continuity Manager agent. This is also the name of the
standard startup cataloged procedure of the Business Continuity Manager agent.
YKMONCG file A file for specifying the option information required to start BCM Monitor
YKMONOPT file A file for specifying the monitoring actions conducted by BCM Monitor
124 Glossary