Multiple Specifications Of Initialization Parameters; Examples Of Specifying Initialization Parameters; When Business Continuity Manager Agent Is Only On The Local Site - HP StorageWorks P9000 Software Installation Manual

CHECK – Does not lock configuration files when the Business Continuity Manager agent starts.
When the Business Continuity Manager agent updates a definition, it verifies that no other
user has updated the configuration file that it is about to update.
NONE – Does not lock the configuration files when the Business Continuity Manager agent
starts.

Multiple Specifications of Initialization Parameters

Table 31 (page 72)
initialization parameter.
Table 31 Results of Multiple Specification of Initialization Parameters
Parameter name
PORT
RECVWAITTIME
HOSTNAME
PREFIX
DEVN
LOGLEVEL
AUDITLOG
MODE
LOCK

Examples of Specifying Initialization Parameters

This subsection provides examples of initialization parameters for linking to P9000 Replication
Manager.

When Business Continuity Manager Agent Is Only on the Local Site

This subsection explains how to specify initialization parameters when Business Continuity Manager
agent is only on the local site and not on a remote site. In such cases, configure the Business
Continuity Manager agent on the local site so that it can perform both local and remote scans.
The following example configuration is used to explain the specification method.
72 Setting Up the Environment When Linking with P9000 Replication Manager
shows the results when multiple SETINIT commands are used to specify each
Multiple specification
Last specified parameter is applied.
Permitted
Last specified parameter is applied.