3.4.3
NAS Stacking
The Thecus IP storage's capacity can be expanded even further using the stackable function. With it,
users can expand the capacity of their network storage systems up to 5 other stack target volumes
which are located in different systems. These can be stacked through single network access like SMB
or AFP acting as a share folder type.
From the Control Panel, the stackable feature is located under "Storage". Please refer the figure below
for reference.
A2 Add a Stack Target Volume
From the figure above, click Add to access the stackable target device configuration page. Please
refer to the figure below:
With the added stack target you can "Enable" or "Disable" the stack target now or later depending on
usage required.
Chapter 3: System Administration
41