Uninterrupted Power Source - Thecus N4310 Series User Manual

3.9.2

Uninterrupted Power Source

From the External Devices menu, choose the Uninterrupted Power Source item and the UPS Setting
screen appears. Make any changes you wish, and press Apply to confirm changes.
See the following table for a detailed description of each item.
UPS Setting
Item
UPS Monitoring
Remote UPS Monitoring
Remote UPS IP
Manufacturer
Model
Battery Status
Power
Seconds between power fail-
ure and first notification
Seconds between subsequent
power failure notifications
Shutdown the system when
the battery charge is less than
Apply
Chapter 3: System Administration
120
Description
Enable or disable UPS monitoring.
Enable or disable Remote UPS monitoring.
Input the IP address of the NAS that the UPS device is connected to via USB or RS232.Input the
IP address of your network UPS.
Choose the UPS manufacturer from the dropdowns.
Choose the UPS model number from the dropdowns.
Current status of the UPS battery
Current status of the power being supplied to the UPS
Delay between power failure and first notification in seconds.
Delay between subsequent notifications in seconds.
Amount of UPS battery remaining before system should auto-shutdown.
Press Apply to save your changes.