Uninterrupted Power Source; Chapter 5: Tips And Tricks; Usb And Esata Storage Expansion - Thecus N12000 series User Manual

Uninterrupted Power Source

From the External Devices menu, choose the Uninterrupted Power Source
item and the UPS Setting screen appears. Make any changes you wish, and press
Apply to confirm changes.
See the following table for a detailed description of each item.
UPS Setting
Item
UPS Monitoring
Remote UPS Monitoring
Remote UPS IP
Manufacturer
Model
Battery Status
Power
Seconds between power failure and
first notification
Seconds between subsequent power
failure notifications
Shutdown the system when the
battery charge is less than
Apply

Chapter 5: Tips and Tricks

USB and eSATA Storage Expansion

The Thecus IP storage supports external USB hard disks through its USB ports. Once
a USB hard disk has successfully mounted, the entire volume will be linked
automatically to the default USB HDD folder. The Thecus IP storage supports USB
external storage devices. All file names on the USB disk volume are case sensitive.
The Thecus IP storage also supports eSATA hard disks with its eSATA port.
Description
Enable or disable UPS monitoring.
Enable or disable Remote UPS monitoring.
Input the IP address of the NAS that the UPS device
is connected to via USB or RS232.Input the IP
address of your network UPS.
Choose the UPS manufacturer from the dropdowns.
Choose the UPS model number from the
dropdowns.
Current status of the UPS battery
Current status of the power being supplied to the
UPS
Delay between power failure and first notification in
seconds.
Delay between subsequent notifications in seconds.
Amount of UPS battery remaining before system
should auto-shutdown.
Press Apply to save your changes.
143