Table of Contents
Advertisement
Battery
Description
Battery (6 cell 95 Wh 4.15 Ah LI )
Before removing the battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the service door (see
Remove the battery:
To remove the user-replaceable battery, refer to the steps and illustration below that most closely match
your computer:
Slide the battery release latches (1) and then pull the battery tab (2) up to remove the battery from the
▲
computer.
NOTE:
Reverse this procedure to install the battery module.
Service door on page
The battery release latches automatically returns to the original positions.
41).
Component replacement procedures
Spare part number
L07044-855
43
Advertisement
Table of Contents
Troubleshooting
