Optical Drive - HP Xw6400 - Workstation - 4 GB RAM Reference Manual

Figure 4-32

Optical drive

Your workstation might have an IDE or SATA optical drive. To remove the optical drive:
1. Disconnect power from the system
access panel
on page
2. Disconnect the data 1, power 2, and audio 3 cables from the drive. The connector colors might be
different than illustrated.
NOTE:
Figure 4-33
84 Chapter 4 Removal and replacement procedures
Identifying the correct power connections for a typical configuration
(Side access panel on page
64).
The audio cable is only required for Linux-based systems.
Disconnecting the cables from the optical drive
(Predisassembly procedures on page
63) and remove the front bezel
57), remove the side
(Front Bezel
ENWW