Select your language from the list and press the
menu, five headings are displayed: File, Storage, Security, Power, and Advanced.
Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down)
keys to select the option you want, and press Enter.
To apply and save changes, select File>Save Changes then select Exit.
If you have made changes that you do not want applied, select Ignore Changes and Exit.
To reset to factory settings, select File>Default setup>Restore Factory Settings as
restores the original factory system defaults.
Utility changes because the Complementary Metal-Oxide Semiconductor (CMOS) could become
corrupted. After you exit the F10 Setup screen, it is safe to disconnect power from the workstation.
Computer Setup (F10) Utility menu
The following content is subject to change with new BIOS releases, so your menu might be
different than shown.
Computer Setup (F10) Utility menu descriptions
Set Time and
to accept the changes. Select Apply Defaults and Exit. This option
Do not power off the workstation while the ROM is saving your Computer Setup (F10)
Cache Size (L1/L2)
Memory Type and Size
Integrated Media Access Control (MAC) for enabled or embedded NIC (if applicable)
System BIOS Type
Chassis Serial Number
Asset Tracking Number
Boot Block Date
Displays copyright information.
Enables you to set system time and date.
Enables you to flash (update) system BIOS using any supported removable mass storage device
(CD-ROM, USB drive, floppy).
Save to Removable Media
Saves the system configuration, including CMOS, in the CP"QSETUP.TXT file. This file can be
saved to a formatted, blank 1.44-MB diskette or to a USB device.
Restore from Removable Media
Restores previous F10 Setup configuration from a text file called CPQSETUP.TXT, which can be
used for Replicated Setup functions.
key. In the Computer Setup (F10) Utility
Computer Setup (F10) Utility