Restoring From The Hp Backup And Recovery Manager Restore Point Cd Or Dvds; Restoring From The Hp Backup And Recovery Manager Restore Point On The Recovery Partition; Protecting The Software; Ordering Backup Software - HP Xw6400 - Workstation - 4 GB RAM Reference Manual

Restoring from the HP Backup and Recovery Manager restore point CD or
DVDs
The HP Backup and Recovery Manager (HPBR) restore point can be burned to CD or DVDs and used
to restore the system. Typically you would used the CD/DVD set if the hard drive has been replaced or
all partitions have been corrupted. Boot the system from the HPBR restore point CD/DVD and follow
the online instructions.
Restoring from the HP Backup and Recovery Manager restore point on the
Recovery Partition
The HP Backup and Recovery Manager (HPBR) Initial Restore Point is stored in the system recovery
partition and can be restored using the Emergency Recovery menu. Boot your system and press the
F11 key when prompted to enter the Emergency Recovery menu. The F11 prompt appears briefly during
the boot process. From the Emergency Recovery menu, choose Recover PC to a specific point in
time and follow the instructions.

Protecting the software

To protect software from loss or damage, keep a backup copy of all system software, applications, and
related files stored on the hard drive. See the operating system or backup utility documentation for
instructions on making backup copies of data files.

Ordering backup software

If you are unable to create system recovery CDs or DVDs, the HP Restore Plus CD set can be obtained
through product support on http://www.hp.com/support.
NOTE: Before calling HP to order the software, be sure to have the serial number of your workstation
available.
ENWW

Protecting the software

23