Reverse this procedure to install the audio/infrared board.
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is available in the Cable Kit, spare part number 448169-001.
Before removing the Bluetooth module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Remove the battery (see
Remove the following components:
Hard drive (see
Optical drive (see
Hinge cover (see
Rear cover (see
Top cover (see
Remove the Bluetooth module:
Disconnect the Bluetooth module cable (1) from the system board.
Remove the two silver Phillips PM2.0×4.0 screws (2) that secure the Bluetooth module to the
Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Hinge cover on page
Rear cover on page
Top cover on page
Spare part number