Using Computer Setup
Changing the language of Computer Setup
The following procedure explains how to change the language of Computer Setup. If Computer Setup is
not already running, begin at step 1.
To start Computer Setup, turn on or restart the computer, and then press
1.
Based Setup" is displayed in the lower-left corner of the screen.
Use the arrow keys to select System Configuration > Language, and then press enter.
2.
Use the arrow keys to select a language, and then press f10.
3.
When the confirmation prompt is displayed, press
4.
To set your preferences and exit Computer Setup, select File > Save Changes And Exit, and
5.
then follow the instructions on the screen.
Your preferences go into effect when the computer restarts in Windows.
Navigating and selecting in Computer Setup
Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation and
selection are by keystroke.
To choose a menu or a menu item, use the arrow keys.
●
To select an item, press f10.
●
To close a text box or return to the menu display, press esc.
●
To display additional navigation and selection information while Computer Setup is open,, press
●
f1.
Displaying system information
The following procedure explains how to display system information in Computer Setup. If Computer Setup
is not open, begin at step 1. If Computer Setup is open, begin at step 2.
To start Computer Setup, turn on or restart the computer, and then press
1.
Based Setup" is displayed in the lower-left corner of the screen.
Access the system information by using the File menu.
2.
To exit Computer Setup without changing any settings, use the arrow keys to select File > Ignore
3.
Changes And Exit, and then follow the instructions on the screen.
f10
f10
to save your preference.
f10
Using Computer Setup
while "F10 = ROM
while "F10 = ROM
93