Remove the video board heat sink (4).
4.
NOTE:
sink and system board components, it may be necessary to move the video board heat sink from
side to side to detach it.
NOTE:
components (1) and the video board heat sink (2) each time the video board heat sink is removed.
Thermal material must be installed on all surfaces before the video board heat sink is reinstalled.
Replacement thermal material is included with all video board heat sink and video board spare part
kits, and is also available using spare part number 413706-001.
Reverse this procedure to install the video board heat sink.
88
Chapter 4 Removal and replacement procedures
Due to the adhesive quality of the thermal material located between the video board heat
The thermal material must be thoroughly cleaned from the surfaces of the video board