Remove the WLAN antenna cables (5) from the opening in the system board.
6.
CAUTION:
prevent damage to the display assembly, support the display assembly before removing the screws.
Remove the six Phillips PM3.0×8.0 screws (1) that secure the display assembly to the computer.
7.
Remove the display assembly (2).
8.
NOTE:
assembly internal components on page 40
Reverse this procedure to install the display assembly.
66
Chapter 4 Removal and replacement procedures
The display assembly will be unsupported when the following screws are removed. To
If it is necessary to replace any of the display assembly internal components, see
for display bezel removal information.
Display
Need help?
Do you have a question about the Pavilion HDX9000 - Entertainment Notebook PC and is the answer not in the manual?