Sliding The Drive Cage In And Out - HP Pavilion xl900 - Desktop PC Service Manual

Sliding the Drive Cage In and Out

The drive cage must be moved out to allow
access to some components on the motherboard
or to the tabs that release the front panels. You
may need to slide the drive cage out in order to
add memory, insert add-in cards, replace optical
drives, or change the battery.
Note:
Make sure the computer is turned off and the
modem/phone cable and power cord are
disconnected from the computer.
To slide the drive cage out:
1 Remove the side panel (see "Removing the
Side Panel" on page 34).
2 Using a #2 Phillips screwdriver, remove
screw (A) and screw (B) if present.
Filename: ma1rwsc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: Ann Schmidt
Revision #: 198 Page: 35 of 70 Printed: 04/26/01 11:33 AM
B
LATCH
3 With your right hand, reach under the top
edge of the chassis and pull the latch out.
Continue to hold the latch in this position while
you complete the next step.
upgrading and servicing the pc
Last Saved By: Jerry C. Stogsdill
A
35