Adding Memory - HP Pavilion xl900 - Desktop PC Service Manual

3 Using a screwdriver or pen, press the two top
tabs on each side of the drive cage. The cover
releases.
4 Remove the cosmetic cover and set aside.
Note:
If you are adding a drive to the lower bay, you
must remove its insert by pressing the two bottom
tabs on each side of the drive cage.
Filename: ma1rwsc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: Ann Schmidt
Revision #: 198 Page: 39 of 70 Printed: 04/26/01 11:33 AM

Adding Memory

The motherboard contains 168-pin DIMM
(dual-inline memory module) sockets; the exact
number of sockets depends on which model you
have. You can install these types of DIMMs in the
system:
Upper Bay &
Front Panel
64 MB SDRAM
Lower Bay
128 MB SDRAM
256 MB SDRAM
All installed memory modules must be 168-pin
unbuffered SDRAM (synchronous dynamic
random access memory) DIMMs and compliant
with the Intel
Specification.
The HP Pavilion ships with one or more DIMMs,
but you can replace the existing DIMM(s) with
higher-capacity ones.
Last Saved By: Jerry C. Stogsdill
®
PC SDRAM Unbuffered DIMM
upgrading and servicing the pc
39