HP Pavilion xl900 - Desktop PC Service Manual page 48

4 Remove the side panel (see "Removing the
Side Panel" on page 34).
5 If necessary to reach the card slots, slide the
drive cage out (see "Sliding the Drive Cage In
and Out" on page 35).
6 Open the back panel door (see "Opening the
Back Panel Door" on page 37).
7 Gently lay the computer on its side.
8 If there is a screw on the expansion slot cover
(A), remove it and set aside.
A
9 If you're adding a new card in a previously
unused slot, you need to remove the expansion
slot cover.
44
hp pavilion home pc
Filename: ma1rwsc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: Ann Schmidt
Revision #: 198 Page: 44 of 70 Printed: 04/26/01 11:33 AM
Warning:
on the expansion slot cover.
Avertissement :
bords du couvercle du logement
d'extension sont tranchants.
Note:
If replacing a card, first disconnect any external
and/or internal cables attached to the card.
Hold the metal bracket and the far top corner of
the card. Carefully remove the card by pulling
the card straight out of the expansion slot.
10 Insert the new card in the slot and push
straight down. Make sure the card is properly
seated.
11 Reinstall the screw that holds the card to the
back panel.
Note:
If you didn't have a screw to remove in step 8,
you need to purchase a 6-32 x .25-inch Phillips
screw to hold the card to the back panel.
Last Saved By: Jerry C. Stogsdill
Be careful of the sharp edges
Soyez prudent, car les